Modelo: ValueRAM
Fabricante: Kingston
Disponibilidad: Consulte disponibilidad
Características
• JEDEC standard 1.5V
(1.425V ~1.575V) Power Supply
• VDDQ = 1.5V (1.425V
~ 1.575V)
• 667MHz fCK for
1333Mb/sec/pin
• 8 independent
internal bank
• Programmable CAS
Latency: 9, 8, 7, 6
• Programmable
Additive Latency: 0, CL - 2, or CL - 1 clock
• Programmable CAS
Write Latency(CWL) = 7 (DDR3-1333)
• 8-bit pre-fetch
• Burst Length: 8
(Interleave without any limit, sequential with starting address “000” only), 4
with tCCD = 4 which does not allow seamless read or write [either on the fly
using A12 or MRS]
• Bi-directional
Differential Data Strobe
• Internal(self)
calibration: Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
• On Die Termination
using ODT pin
• Average Refresh
Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB: Height 0.740” (18.75mm) or 1.180” (30.00mm)
Características:
• CL(IDD) 9 cycles
• Row Cycle Time
(tRCmin) 49.125ns (min.)
• Refresh to
Active/Refresh 260ns (min.)
• Command Time (tRFCmin)
• Row Active Time (tRASmin) 36ns (min.)
• Maximum Operating
Power TBD W*
• UL Rating 94 V - 0
• Operating Temperature
0o C to 85o C
• Storage Temperature
-55o C to +100o C
*Power will vary
depending on the SDRAM used.
Descripción | |||
KVR13N9S8_4.pdf | Descargar Archivo |
© 2024 Todos los derechos reservados. puntosdeventa.com.sv
Propiedad de Sointec S.A. de C.V.